{"id":188,"date":"2026-11-21T07:33:00","date_gmt":"2026-11-21T06:33:00","guid":{"rendered":"https:\/\/www.whatismyipaddressinquire.com\/blog\/?p=188"},"modified":"2026-11-15T09:33:38","modified_gmt":"2026-11-15T08:33:38","slug":"public-ip-before-port-forward-test","status":"publish","type":"post","link":"https:\/\/www.whatismyipaddressinquire.com\/blog\/public-ip-before-port-forward-test\/","title":{"rendered":"Confirming Public IP Before a Port-Forward Test"},"content":{"rendered":"<p><strong>TL;DR \/ Summary:<\/strong> Port-forward tests fail for boring reasons: you probed the wrong public IP, you tested from inside the LAN, or CGNAT made the forward unreachable from the outside. Confirm the current egress address, test from a true external network, and interpret \u201cconnection refused\u201d differently from \u201ctimeout.\u201d<\/p>\n<h2>Know which address the internet will dial<\/h2>\n<p>Your port-forward rule points an external port at an internal host. Outside clients must aim at your current public IP\u2014or a hostname that resolves to it\u2014not at the router\u2019s LAN address.<\/p>\n<p>Write down the public IP immediately before the test. Leases change; a hostname that updated an hour ago may still be wrong if DNS is cached on the probing machine.<\/p>\n<p>If you use both IPv4 and IPv6, know which family the forward applies to. An IPv6-only listener will not answer an IPv4 probe.<\/p>\n<h2>Inside-LAN tests lie<\/h2>\n<p>Hairpin NAT (NAT loopback) is inconsistent across routers. Testing a public IP from a laptop on the same LAN may fail even when external users would succeed\u2014or succeed when external users would fail.<\/p>\n<p>Use a phone on cellular data, a VPS, or a friend\u2019s network for the external probe. That is the only trustworthy outside view.<\/p>\n<h3>What to record during the probe<\/h3>\n<ul>\n<li>public IP you targeted<\/li>\n<li>port and protocol (TCP\/UDP)<\/li>\n<li>network used for the probe (cellular, remote VPS)<\/li>\n<li>result: connect, refuse, or timeout<\/li>\n<\/ul>\n<p>Those four fields turn a vague \u201cit doesn\u2019t work\u201d into a diagnosable report.<\/p>\n<p>Confirm the target IP with <a href=\"https:\/\/www.whatismyipaddressinquire.com\/\">What Is My IP Address Inquire<\/a> on a machine behind the router you are forwarding through\u2014right before you start the external probe.<\/p>\n<h2>Read the failure mode<\/h2>\n<p>Connection refused often means something answered on that IP\u2014usually your router\u2014and no service is listening on the port, or a firewall actively rejects it.<\/p>\n<p>Timeouts more often mean drops: ISP blocks, missing forward, wrong internal IP, or CGNAT where your \u201cpublic\u201d address is not uniquely yours.<\/p>\n<blockquote><p>Refuse and timeout point at different layers. Do not treat them as synonyms.<\/p><\/blockquote>\n<p>Wrong internal IP (stale DHCP) produces outside timeouts while the service works on the LAN. Check the host\u2019s current address against the forward rule.<\/p>\n<h2>CGNAT changes the meaning of \u201cpublic IP\u201d<\/h2>\n<p>Under carrier-grade NAT, the address you see may be shared, and inbound forwards on your home router never receive unsolicited internet traffic. No amount of port-forward configuration on your LAN gear fixes that.<\/p>\n<p>Clues include ISP documentation mentioning CGNAT, failure of all inbound tests despite correct rules, and inability to ping your looked-up address from outside.<\/p>\n<p>Remedies are product-level: request a public IP, upgrade tiers, or use outbound tunnels\/relays instead of classic forwards.<\/p>\n<h2>Double-NAT with ISP gateways<\/h2>\n<p>When an ISP modem runs NAT and you add your own router behind it, you have two layers. Forwarding only on the inner router is not enough; the outer gateway must forward to the inner router\u2019s WAN address, which must itself be reachable.<\/p>\n<p>Prefer bridge\/passthrough mode on the ISP gateway when you want a single NAT boundary. Document which device holds the true public IP.<\/p>\n<h3>Quick double-NAT check<\/h3>\n<ul>\n<li>compare the public IP lookup to the WAN IP shown on your inner router<\/li>\n<li>if they differ, another NAT sits in front<\/li>\n<li>fix the outer device\u2019s client list for your router\u2019s address<\/li>\n<\/ul>\n<p>Matching WAN IP to the lookup is the green light for single-layer forwards.<\/p>\n<h2>Security while you test<\/h2>\n<p>Open only the ports you need, and only while testing if possible. Forwarding admin interfaces to the world is a common self-own.<\/p>\n<p>Prefer keys over passwords on forwarded SSH, and keep services patched. A successful forward test is also a successful attack path if left careless.<\/p>\n<blockquote><p>Prove reachability, then harden exposure.<\/p><\/blockquote>\n<p>Close temporary test forwards when you finish. Forgotten rules accumulate.<\/p>\n<h2>UDP services need different probes<\/h2>\n<p>Game servers, WireGuard, and some VoIP paths use UDP. A TCP port check against a UDP-only forward will mislead you into thinking the forward is broken.<\/p>\n<p>Use a probe that speaks the same protocol, or temporarily run a known UDP echo tool on the internal host while you test. Match protocol in the router rule and in the test.<\/p>\n<p>Firewalls sometimes allow TCP established flows while dropping unsolicited UDP. If TCP forwards work and UDP fails, inspect UDP-specific filters before rewriting the entire NAT setup.<\/p>\n<p>Also confirm the internal host\u2019s local firewall allows the inbound port on the LAN interface. A perfect router forward still fails if the PC silently drops the packet.<\/p>\n<h2>Dynamic DNS and retests<\/h2>\n<p>After a modem reboot, re-check the public IP before blaming the application. Update DDNS, flush resolver caches on the probe machine, and run the external test again.<\/p>\n<p>Automate DDNS where you can so overnight lease changes do not silently break inbound access.<\/p>\n<p>Schedule a monthly external probe if the forward matters for work. Quiet lease changes are easier to catch on a calendar than during an emergency.<\/p>\n<p>Port forwarding is a chain: public identity, NAT layers, correct internal host, listening service, and an honest external probe. Start with the public IP, or every later step is theatre.<\/p>\n<h2>Carrier-grade NAT still fools DIY forwards<\/h2>\n<p>If the address on the modem WAN page is private (often 10.x or 100.64.x) while a public lookup shows a shared carrier IP, your forward will never accept inbound traffic from the wider internet.<\/p>\n<p>Ask the ISP for a public WAN address or a business package before you rebuild firewall rules. No amount of router tinkering unlocks inbound ports behind CGNAT.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>TL;DR \/ Summary: Port-forward tests fail for boring reasons: you probed the wrong public IP, you tested from inside the LAN, or CGNAT made the forward unreachable from the outside. Confirm the current egress address, test from a true external network, and interpret \u201cconnection refused\u201d differently from \u201ctimeout.\u201d Know which address the internet will dial&hellip;&nbsp;<\/p>\n","protected":false},"author":1,"featured_media":114,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"neve_meta_sidebar":"","neve_meta_container":"","neve_meta_enable_content_width":"","neve_meta_content_width":0,"neve_meta_title_alignment":"","neve_meta_author_avatar":"","neve_post_elements_order":"","neve_meta_disable_header":"","neve_meta_disable_footer":"","neve_meta_disable_title":"","footnotes":""},"categories":[12],"tags":[],"class_list":["post-188","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-ip-lookups"],"_links":{"self":[{"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/posts\/188","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/comments?post=188"}],"version-history":[{"count":1,"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/posts\/188\/revisions"}],"predecessor-version":[{"id":189,"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/posts\/188\/revisions\/189"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/media\/114"}],"wp:attachment":[{"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/media?parent=188"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/categories?post=188"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.whatismyipaddressinquire.com\/blog\/wp-json\/wp\/v2\/tags?post=188"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}